Image

As you may have noticed, we we're offline this morning. This was caused by the "Thanks" plug-in going rogue and using up way too many server resources. This triggered an automatic suspension by our hosting provider as they thought it was a malicious attack. The "Thanks" plug-in has been disabled, hopefully temporarily so I can determine if that was indeed the cause, and take steps to prevent it from happening in the future.

I apologize for the disruption and for any confusion that may have caused.

Dial cleaning tips?

This is the place to learn all about watches and how they tick. Share your knowledge and how-tos with the rest of the class.
Post Reply
User avatar
Sussa
MoT Member
Posts: 1266
Joined: Tue Mar 05, 2019 6:48 am
Location: Massachusetts

Dial cleaning tips?

Post by Sussa »

I've decided to revisit this Timex Viscount that's been on my workbench for 4 years. I think I've found a decent donor movement and hands. While I'm waiting for that, I'd like to clean the dial. Any tips for removing the patina between 8 and 12? I can't tell if it's oxidation, dirt, or...? Thanks!
PXL_20201001_205153100.jpg
User avatar
watchpalooza
Global Moderator
Posts: 4310
Joined: Fri Dec 21, 2018 12:43 pm
Location: Munich & SF Bay Area

Re: Dial cleaning tips?

Post by watchpalooza »

The one tip I can offer is that most unprofessional attempts to restore dials result in less than astonishing results. Except for dusting off with a soft damp makeup brush or lightly touching with rodeco, I would advise to leave it alone.
Click Icon To Contact Me


’There is a crack in everything. That’s how the light gets in.’ - Leonard Cohen, Anthem
’One man's faith is another man's delusion.’ - Anthony Storr
User avatar
Sussa
MoT Member
Posts: 1266
Joined: Tue Mar 05, 2019 6:48 am
Location: Massachusetts

Re: Dial cleaning tips?

Post by Sussa »

I tried vinegar diluted in distilled water on the dial of the movement donor watch to see if it would strip the paint. It didn't, and it slightly cleaned the donor, but it didn't clean the dial in the pic above. Unfortunately the new movement didn't fit, so it's back to the bench.
Post Reply